- Grace, J. R., Heat Transfer in Circulating Fluidized Beds,”In Circulating Fluidized Bed Technology I”, P. Basu (Eds.), Pergamon Press, Oxford, 63 – 72,1986.
- Raiko, R., Kurki-Suonio, I., Saastamoinen, J., &Hupa, M., “International Flame Research Foundation (IFRF)”, Jyväskylä, 417-466, 1995.
- Kunii, D., Levenspiel, O.,” Fluidization engineering”.Butterworth-Heinemann, Boston, USA, 1991.
- Basu, P., Subbarao, D., An experimental investigation of burning rate and mass transfer in a turbulent fluidized bed, “Combust. Flame” 66, 261-269, 1986.
- Basu, P., & Fraser, SA., Circulating fluidized bed boilers–design and operations. Butterworth- Heinemann, Boston, 1991.
- Waqar Ali Khan, KhurramShahzad, and Niaz Ahmad Akhtar, Hydrodynamics Of Circulating Fluidized Bed Combustor: A Review, “Journal of Pakistan Institute ofChemical Engineers”, Vol. XXXVII, 1999.
- Bo Leckner, Fluidized Bed Combustion Research And Development In Sweden – A Historical Survey, “Thermal Science:” Vol. 7 ,No. 2, Pp. 3-16, 2003.
- Basu, P., and Nag, P.K., Heat Transfer to the Walls of a Circulating Fluidized Bed Furnace A Review, “Chem. Eng. Science”, 51 (1), 1 – 26, 1996.
- Miccio.M., Miccio.F., Fluidized Combustion Of Liquid Fuels: Pioneering Works, Past applications, Today's Knowledge And Opportunities, “Proceedings of the20th International Conference on Fluidized Bed Combustion”,2009.
- YrjoMajanne, JaniLaine, JyriKaivosoja, Petri Koykka, Modeling and simulation of interconnected CFB-boiler and fast pyrolysis processes – Control design case,18th IFAC World Congress Milano (Italy), August 28 – September 2, 2011
- Sivakumar L,SundarrajS,Anandhi,T, System design document - Software on dynamic modeling of CFBC furnace, “An Internal consultancy project” documentprepared at Sri Krishna College of Engineering and Technology , Coimbatore and submitted to Corporate, R & D, BHEL, Hyderabad, India, 2010.
- Wang, Q., ZhonggyangLuo, Xuantian Li, Mengxiang Fang, Mingjiang Ni, Kefa Cen, “Energy” 24(1999) 633-653, 1999.
- Jong-Min Lee, Jae-Sung Kim, Jong-Jin Kim, CCT experience of Tong-Hae CFB boiler using Korrean Anthracite, “03 APEC Clean fossil energy technical andpolicy seminar”, Korea, 2003.
- Li Zhao, XiangdongXu, A mathematical model for differential-velocity Circulating Fluidized Bed Boiler, “Journal of Thermal Science” , Volume 8, No.3, 1999.
- XuZhengyu, Niu Kai, The simulator model for a circulating fluidized bed boiler, “Computers and Applied Chemistry”, vol - 02, 2008.
- Li, Q. H., Zhang, Y. G., Meng, A. H., Design and Application Of Novel Horizontal Circulating Fluidized Bed Boiler, “Proceedings of the 20th International Conference on Fluidized Bed Combustion”, 2009.
- Sung won kim, Won Namkung and Sang Done kim, Solids flow characteristics in loop seal of a circulating fluidized bed, “Korean journal of Chemical Engineering”, 16(1),82-88, 1999.
- Basu, P., Cheng, L., An Analysis of Loop Seal Operations in a Circulating Fluidized Bed, “Transactions of Institution of Chemical Engineers”, v. 78, Part A, pp 991 998, , Oct 2000.
- Malcus.S., Chaplin, G., Pugsley, T., The hydrodynamics of the of the high density bottom zone in a CFB riser analyzed by means of electrical capacitance tomography, “Chemical Engineering science”, 55 , 4129 – 4138, 2000.
- AnimeshDutta, PrabirBasu, An experimental investigation into the heat transfer on wing walls in a circulating fluidized bed boiler, “International journal of heat and mass transfer”, Volume 45, Issue 22, Pages 4479-4491, 2002.
- Lee,J.M., Jae sung kim, Jong Jin Kim, Evaluation of the 200 MWeTonghae CFB boiler performance with cyclone modification, “Energy”,28,575-589, 2003.
- Yang, H. R, Yue, G. X., Wang, Y., “Journal of Engineering for Thermal Energy and Power”, 20(3),291-295,2005.
- Jin, X., Lu, J. F., Qiao, R., et al., “Clean Coal Technology”, 5(1): 20-23, 1999.
- Yue, G. X., Lu, J. F., Zhang, H, et al. Design Theory of Circulating Fluidized Bed Boilers, “18th International Fluidized Bed Combustion Conference”, May 18-21, Toronto Canada, 2005.
- Anusornchinsuwan, AnimeshDutta, An investigation of the heat transfer behavior of longitudinal finned membrane water wall tubes in CFBC boilers, “Powder technology” , 193, 187-194, 2009.
- Jun Su, Xiaoxing Zhao, Jianchun Zhang, Aicheng Liu , Hairui Yang, Guangxi Yue, Zhiping Fu, Design and Operation Of CFB Boilers With Low bed Inventory, “Proceedings of the 20th International Conference on Fluidized Bed Combustion”, 2009.
- Zhang, P., Lu, J. F., Yang, H. R., Zhang, J. S., Zhang, H., Yue, G. X., Heat Transfer Coefficient Distribution In The Furnace Of A 300MWe CFB Boiler, “Proceedings of the 20th International Conference on Fluidized Bed Combustion”,2009.
- Zhang Man, BieRushan, Yu Zezhing, Jiang Xiaoguo, Heat flux profile of the furnace wall of a 300 MWe CFB boiler, “Powder Technology”, 203,548-554,2010.
- Xiong.B., Xiaofeng Lu, R.S.Amano, HanzhouLiu,Gas-solid flow in an integrated external heat exchanger for CFB boiler, “Powder Technology”,202,55,61,2010.
- Jones, D.R.M., Davidson, J.F., The flow of particles for a fluidized bed through orifice, “Acta4”,180-192,1965.
- Bing zeng, Xiaofengxu, Lu gan, MaolongShu, Development of a novel fluidized ash cooler for CFB boilers: Experimental study and application, “Powder technology”, 212, 151-160, 2011.
- XuanyuJi, Xiaofeng Lu, XiaoleiXue, Honghao He, Wang,Q., Jianbo Li, Development On A Small Scale Industrial CFB Boiler With An Evaporating Loop Seal, “Applied Thermal Energy”, 36, 464-471, 2012
- Maryamchik, M., Wietzke,D.L., B&W PGG IR – CFB: Operating experience and new developments, “21st International; Fluid Bed Combustion Conference”, Italy,2012.
- Belin,F., Marymchik, M., Walker, D.J., Wietzke, D.L., Babcock & Wilcox CFBC boilers- Design and experience, “16th International Conference on FBC”, 2001
- Loffler., Wartha, C., Winter, F., and Hofbauer, H., “Energy & Fuel”, 12:1024-1032, 2002.
- Hou, X. S., Zhang, H., Yue, 0. X, et al., Reduction of N20 and NO by NH3 on Circulating Ashes: The Effect ofO2 Concentration, “19th International Fluidized Bed Combustion Conference”, Austria, Vienna, 2006.
- Krzywanski .J., Tomasz czakiert, Waldemarmuskala, Robert secret, Wojciech Nowak, Modeling of solid fuel combustion in oxygen-enriched atmosphere in CFBC, “Fuel processing Technology”, 91, pages 364-368, 2010.
- Li Zhao, XiangdongXu, A mathematical model for differential-velocity Circulating Fluidized Bed Boiler, “Journal of Thermal Science”, Volume 8, No.3, 1999.
- Archie Robertson, Steve Goidich, Zhen Fan, 1300°F 800 MWe USC CFBC Boiler Design Study, Foster Wheeler, “20th International Conference on Fluidized Bed Combustion”, XiâÃâ¬ÃŸan, China, May 18 – 20, 2009.
- ArtoHotta, Foster Wheeler's Solutions For Large Scale CFBC Boiler Technology: Features And Operational Performance Of Lagisza 460 Mwe CFBC Boiler, “Proceedings of the 20th International Conference on Fluidized Bed Combustion”,2009.
- AfsinGungor, A., Study on the Effects of Operational Parameters on bed-to-wall heat Transfer, “Applied Thermal Engineering”, 2008.
- ErkkiKarppanen, Advanced control of an industrial circulating fluidized bed boiler using fuzzy logic, “Ph.D thesis”, University of Oulu, Oulu, 2000.
- Singh, R. K., Suryanarayana, A., And Roy, G. K., Prediction Of Minimum Fluidization Velocity And Bed Pressure Drop In Non-Circular Gas-Solid Fluidized Bed, “Indian Chem. Engr.”, Section A. Vol. 37, Nos. 1-2 ,1995.
- Ergun, S., Fluid flow through packed columns, “Chemical Engg. Prog.”, 48-89,1952.
- Oka, S.N ., Fluidized Bed combustion, Marcel Dekker, Inc., New York, 2004.
- Harris, B.J., and Davidson, J.F., Modeling options for circulating fluidized beds: A core/annulus deposition model, “Circulating fluidized bed technology IV. AIChE”, New York, pp. 32-39, 1994.
- Gelperin, N. I., and Einstein ,V. G., Heat transfer in fluidized beds, in “Fluidization”, Ed.by J.F. Davidson and D. Harrison, Chapter 10, Academic press, New York, 1971.
- Roy, G. K., &Sarma, K. J. R., Fluidized bed heat transfer, “Chemical Processing & Engineering”, February, 1970.
- Courbariaux, Heat transfer in a circulating fluidized bed, “Master of science thesis”, University of New Brunswick, 1998.
- Andersson, B.A., and Leckner, B., Local lateral distribution of heat transfer on tube surface of membrane walls in CFBC boilers, in “Circulating Fluidized Bed Technology IV” (ed. A. Avidan), AIChE, New York, pp. 311–318, 1993.
- Baukal, C.E., Heat transfer in industrial combustion, CRC Press, 2000.
- Werdmann C C&Werther J Solids flow pattern and heat transfer in an industrial scale fluidized bed heat exchanger, in; Proceedings of the “12th International conference on fluidized bed combustion”, 2, 985-990, 1993.
- Dutta, A., Basu, P., Overall heat transfer to water walls and wing walls of commercial circulating fluidized bed boilers, “J.I.Energy” 75,(504), 85-90, 2002.
- Yong Jun Cho, Won Namkung, Sang Done kim, Sunwon Park, PyungTchai Kim, Effect of secondary air injection on bed to wall heat transfer in a CFB, “Journal of chemical engineering of Japan”, vol 29,1,1996
- Halder,P.K., Combustion of single coal particles in CFB, “PhD thesis”, 1989.
- Talmor, E., and Benenati, D., Solids mixing and circulation in gas fluidized beds, “AIChE J”. 9, 536-540,1963.
- Souza-Santos M L , Solids fuels combustion and gasification, Marcel Dekker, Inc., New York, 2004
- Basu, P., Combustion and gasification in fluidized bed, CRC press, 2006.
- Field, M .A., Gill, D .W., Morgan B B, Hawksley P G W Br. Coal Utiliz. Res. Assoc. Mon. Bull 31(6) 285-345, 1967.
- Visser.G., and Valk.M., The porosity in a fluidized bed heat transfer model, “International Journal of heat and mass transfer”, volume 36, No.3, page 627-632,1993.
- Andersson, B.A., Effects of bed particle size on heat transfer in CFBC boilers, “Powder Technology”, 87, pages 239-248, 1998.
- Werner.A, Solids distribution as a basis for modeling of heat transfer in circulating fluidized bed boilers, “Experimental Thermal and Fluid science”, 25, 269-276, 2001.
- Wen, C.Y., Yu, Y.H., Mechanics of fluidization, “Chemical Engineering Progress Symposium Series”, 62 , 100–110, 1966.
- Gupta, A.V.S.S.K.S., Nag, P.K., Bed to wall heat transfer behaviour in a pressurized circulating fluidized bed, “International journal of Heat and Mass transfer”, 45, 3429-3436, 2002.
- Brem, overall modeling of atmospheric fluidized bed combustion and experimental verification, “Elsevier science” B.V., Amsterdam, 1995.
- Huilin.L., Guangbo.z., Rushan.B., Yongjin.C., Gidaspow.D., A coal combustion model for circulating fluidized bed boilers , “Fuel”, 79, 165-172, 2000.
- Jim in Kim, Guiyoung Han, Changkeun Yi, Axial dispersion of gas in a circulating fluidized bed, “Korean Journal of Chemical Engineering”, 19(3), 491-494,2002.
- Saastamoinen,J.J., Tourunen,A., Hamalainen,J., Hyppanen,T., Loschkin,M., Kettunen,A., Analytical solutions for steady and unsteady state particle size distributions in FBC and CFBC boilers for non breaking Char particles, “Combustion and Flame”, 132, pages 395-405, 2003.
- Zhang, H., Lu, J. F., Yang, H. R., “Proceedings of the 8th Circulating Fluidized Bed Technology”, pp. 254-260, 2005.
- P.Basu, Nyoman.S.Winaya , Effect of pressure and carbon dioxide concentration on heat transfer at high temperature in a Pressurized Circulating Fluidized Bed (PCFB) combustor, “Heat and Mass Transfer”, Volume, Pages 2965–2971, 2001
- Wennan Zhang, FilipJohnsson, Bo Leckner, Fluid-dynamic boundary layers in CFB boilers, “Chemical Engineering Science”, Volume 50, Issue 2, Pages 201– 210, January 1995.
|