condensed-matter-physics-2018-scientifictracks

21 / 24

Page 57
Notes:
Research & Reviews: Journal of Material Sciences | ISSN: 2321-6212 | Volume 6
Theoretical, Materials and Condensed Matter Physics
5th International Conference on
November 26-28, 2018 | Los Angeles, USA
Fabrication and characterization of copper doped cadmium sulphide thin film solar cell
Sabur Abiodun Ayinde
The Federal Polytechnic, Nigeria
The fabrications of electronic components, especially solid-state devices and microelectronic integrated circuits, have
undoubtedly found the widest and most demanding applications for thin-film depositions. With a view to fabricating a
solar cell, a prepared precursor of Copper Cadmium dithiocarbamate was used for the deposition of CuCdS thin films at 420oC
on ITO coated glass substrate by MOCVD technique as the absorber layer. Aluminium doped Zinc Oxide (AZO) was also
deposited by spray pyrolysis at 350oC as the window layer on the deposited absorber layer. Silver paste was drop-dried on the
deposited window layer as the ohmic contact.The result of the deposited layered thin films and the solar cell were analyzed using
Rutherford Backscattering Spectroscopy and Energy Dispersive X-ray (EDX), UV Visible spectrophotometer, Keithley four-
point probe instrument, and I-V analysis. The RBS analysis of the deposited CuCdS film revealed the percentage composition
of Cu=4.20%, Cd=10.77%, S=33.74%, and O=51.27%. Film thicknesses of 133nm and 889nm were recorded for AZO and
CuCdS thin film respectively as obtained from the RBS analysis. The composition of AZO as observed by EDX is Al=1.13%,
Zn=66.40%, and O=21.61%. The UV-visible analysis of AZO film revealed that the film had an optical transmittance of 60%
in the visible portion of the spectrum with a direct bandgap of 3.25eV, while bandgap of CuCdS is 2.41eV. The absorbance of
the CuCdS film was observed to be low in the VIS/NIR regions and high in UV region. The sheet resistance and resistivity of
AZO film are 9.58×106 Ω/square and 1.27×10-2 Ωcm respectively, while 1.17×109 Ω/square and 10.40Ωcm were obtained as
the sheet resistance and resistivity of CuCdS film respectively. The I-V analysis of the fabricated solar cell showed that, under
dark condition, it behaves like a diode or semiconductor current rectifier. The fill factor as extracted from the device and its
corresponding conversion efficiency are 0.6911 and 4.38% respectively.
Biography
Sabur Abiodun Ayinde is a PhD student at Obafemi Awolowo University where he had his masters in Engineering Physics in 2015. He is a 33 years academic
staff of The Federal Polytechnic, Ede, Nigeria. He has worked in a manufacturing industry after the graduation of his first degree and has spent the past 7 years
of his life as a polytechnic teacher. He has attended a series of conferences and has published more than 8 papers in reputed journals. In his quest to know how
things work, he likes to solve challenging problems in materials and solid state electronics. He is happily married with a kid and has always had the desire to render
community services to the people.
Sabur Abiodun Ayinde, Res. Rev. J Mat. Sci. 2018, Volume 6
DOI: 10.4172/2321-6212-C10-041