2 / 14
Page 27
Notes:
conferenceseries
.com
Volume 6
Research & Reviews: Journal of Material Sciences
CrystalloPolySci 2018
November 19-20, 2018
4
th
International Conference on
Crystallography & Novel Materials
&
9
th
International Conference on
Biopolymers & Polymer Sciences
November 19-20, 2018 Bucharest, Romania
Uwe Popp et al, Res. Rev. J Mat. Sci. 2018, Volume 6
DOI: 10.4172/2321-6212-C9-038
Mechanical properties of heat treated 3D printed semi-crystalline PEEK material
Uwe Popp and Brando Okolo
Apium Additive Technologies GmbH, Germany
R
elatively new manufacturing processes such as 3D printing or additive manufacturing impose a set of thermos-mechanical
influences on materials. These influences have neither been extensively studied nor reported in the literature. For high
temperature semi-crystalline thermoplastic materials like PEEK (poly-ether-ether-ketone) these influences can be quite
pronounced. The 3D printing of PEEK requires a strict definition of the processing conditions and parameters. One of the
challenging aspects of the processing is the control of the temperature profile dominant in and around the printed part. This
is especially important because the development of the crystalline phase in 3D printed PEEK part depends on the cooling rate
of the melt during the printing process. A typical attribute of 3D printed parts is the structural discontinuities observable on
the surface and in the vicinity of the deposited layers. To improve on the structural integrity of the printed part, some heat
treatment is conducted on the part. In the current presentation, results for tempered 3D printed PEEK parts are presented. The
mechanical properties as well as the microstructural state of the PEEK parts are reported and explained within the context of
the tempering process.
Biography
Uwe Popp has completed his Diploma in Material Science and Engineering from the University of Stuttgart in 2012 and worked for two years at the Karlsruhe
Institute of Technology as a Research Assistant. He is currently the Head of Research and Development at Apium Additive Technologies GmbH as well as one of
the Founders of the company. He has participated in publishing more than 5 papers in reputed journals.
uwe.popp@apiumtec.com